Description:
BTGP-38K, a high-tech product combines the advanced Bluetooth technology and GPS technology. Through, Bluetooth technology, you can receive GPS data through intelligent mobile phone, PDA, laptop and desktop for location and navigation.
Set up wireless connection for 65Ch Bluetooth GPS Receiver
When power is on, the green LED turns on, indicating the state of location. Blue LED swiftly flashes, indicating that it enters to matching state. Now, you input search command on your Bluetooth device (computer, PDA, mobile or laptop etc). When it is searched out, select “BTGP-38K” and then input the code”0000”, so that the matching is complete.
Test 65Ch Bluetooth GPS Receiver on computer
After the matching is completed, the computer will prompt that there is a serial port. Write down the number of it and open the test software in the CD. Select the said port and set the bit rate at 9600bps. Click “Open” to open the serial port and then it will display the current locating data.
Features:
1. Very low electricity cost and work up to maximum 15 hours
2. High-sense, good-performance GPS chip, receiving 65 satellites simultaneously
3. Accord with Bluetooth 2.0 Specification CLASS 2
4. Support Bluetooth serial communication Profile (SPP Profile)
5. Compatible with li-battery and charger of Nokia mobile (e.g.N70)
6. 3 LED indicate statues of Bluetooth, GPS and recharging
7. Support the baud rate 9600bps in NMEA-0183 standard
8. Small-size, humanized design, portable, cute appearance
Specifiaction:
General Index
Receivable frequency: L1, 1575.42MHz
C/A code: 1.023MHz
Channel: 65
Sensibility
Search: -151dBm
Track: -158dBm
Precision
Location: 7m CEP 90%, 3m CEP 50%(SA OFF)
Velocity: 0.1m/s
Location time
Hot startup: 1s, average
Warm startup: 35s, average
Cold startup: 40s, average
Dynamic condition
Altitude: Max 10 km
Horizontal speed: Max 515m/s
Acceleration: Max 4g
GPS protocol
NMEA-0183 ASIC protocol
Default NMEA GGA, GSA, GSV and RMC, (VTG, GLL and RMS optional)
9600bps baud rate, 8 data bits, 1 stop bit, no check bit
Bluetooth index
Bluetooth code V2.0+EDR
Emission power Class 2 (4dBm max)
Receiving sensibility -80dBm
Communication distance 10m typical (free space)
Profile Communication Profile Serial Port Profile (SPP)
Power consumption
Working current: about 60mA average
Working voltage: 3.7V~4.2V
Chargeable voltage: 5.5V
Battery
Recharge time 2.5hrs typical
Working time about 15hr, track after the charging is full
Environment
Working temperature: -40℃ to +85℃
Storage temperature: -40℃ to +150℃
Size: 72.8(L) x45.8 (W) x18.8 (H) mm
Wight: 70g
Package contents
1. Main unit
2. Chargeable li-battery
3. User’s manual
4. Home charger and Car charger
Article from : http://www.all-batteries.co.uk/gps/65-channels-bluetooth-gps-receiver.htm
No comments:
Post a Comment